Summer is finally here, which means it is time (well, it’s long overdue) to crank up the AC. But if your air conditioner isn’t working correctly, it’s time to take matters into your own hands-and with the help of a professional.
Typically, there’s a simple solution to any problem. If your refrigerator isn’t cooling, you check the door gasket to see if it needs to be replaced. If your washing machine leaks, you check the drain hose. If your air conditioning system isn’t cooling, you check your air filter to see if it needs to be cleaned.
However, the problem with an air conditioning unit isn’t this simple always. Though most of the time cleaning the filters can solve the problem, this trick wouldn’t work in all cases. And in those rare situations, it tends to become imperative to hire HVAC professionals, maybe from the likes of Altitude Air Solutions air conditioning installation and repair. Needless to say, only expert hands can solve the problem from the root cause.
With that being said, here’s how to make sure your AC unit is working efficiently.
Checking the thermostat batteries to see if it is dead
If your air conditioning is not working properly, the easiest thing to do is check the thermostat batteries. It is a common problem and very easy to solve. Make sure that your vent register is closed and that the air conditioner is plugged in. Check your thermostat. If it is set to cool, turn the dial to FAN, and set the thermostat to 65 degrees or less. Then, set your thermostat to COOL. Your air conditioner should run for about 30 minutes or longer if it is working properly.
Check the indoor disconnect switch is off
Your air conditioner may be cooling your home, but the indoor disconnect switch could be why it’s not running properly. The indoor disconnect switch is an inside switch that turns off power to the outdoor unit when the air conditioner is not in use. If the indoor disconnect switch is off, your air conditioner could shut off for no good reason, and you could be wasting energy and money.
You’ve got a tripped circuit breaker
You’ve probably heard of the term “tripped circuit breaker” before, but what does it mean, and what to do if your air conditioning unit is not working to its full potential? Well, when a circuit breaker trips, the problem is usually to avoid overloading the circuit. Sometimes the problem occurs when there’s a short circuit.
You’ve got a blown transformer
Whether you use electricity for heat or cooling, or power lights, appliances, and electronics in your home, your building’s electrical service panel is where your power comes from. It is a metal box, usually found near the main power source, which contains electrical cables and switches that regulate the flow of electricity. A blown transformer is a common problem among homeowners with the electrical system of their homes, and there are many warning signs. Fortunately, if you detect any of the following symptoms, you can troubleshoot the problem by contacting a licensed electrician.
Starting components are on the fritz
It can be very frustrating when your air conditioner is on the fritz. For one, you’re stuck inside, but running your air conditioner when it’s not working properly can significantly raise your energy costs. Rather than suffering through the heat, call in a professional today to fix your air conditioner so you can get your home cool again.
Check if your indoor, and outdoor coils are dirty
The dirty indoor coil is one of the primary causes of poor indoor air quality. It’s necessary to clean the coils in order to optimize the air conditioner’s performance.
There are several signs that your air conditioner isn’t working properly, but a lack of cool air doesn’t necessarily mean a problem. The operator may simply need to adjust settings. Another common problem is a dirty filter, which can be caused by a number of things, such as dust buildup, pests, or mold spores. If you don’t want to call a professional, consider cleaning the filter yourself to ensure your system runs efficiently.